The 9 Things Your Parents Teach You About Saab 93 Key Fob > 자유게시판

How to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that is full of appeal for drivers. It is well-lit and has an efficient engine. It has a high safety rating.

It is nevertheless important to ensure that you have at minimum two keys working for your car. It can be costly to replace a key if you lose it.

How to Replace the Ignition Key on the Saab 9-3

You'll need to replace your car keys in the event that it isn't turning. This guide will teach you how to replace the ignition key on the Saab 9-3. You will need to replace the key, get another reprogrammable device, and buy a new case for your key-fob.

Unlike older models, most modern Saab vehicles use a transponder in the key-fob rather than a physical key that can be used to unlock and start the car. The issue with this is that the reprogrammable battery in the key-fob will wear out and not hold a charge anymore. This is particularly applicable if you are using the same key for the same lock.

A professional locksmith can replace the battery quite easily. You can also do it yourself if have the right tools and a bit of patience. The first step is taking the key-fob apart. This is done by inserting a flathead screwdriver in the slot located in the middle of the case. You must work slowly, as the plastic is very thin and can easily be damaged.

Once the case is opened, you can make the new key by combining the lower part of old key with transponder and banana. This will ensure that the new key is connected to the CIM properly, which could make a big difference when replacing the only key for your Saab 9-3.

How do I replace the ignition Key in a saab 93 key replacement 900

If you don't have two keys, you'll have to take off the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can remove the dashboard and trim pieces around the steering wheel. After the dashboard is taken off, you can push a screwdriver into the opening behind the ignition switch and pull it out.

The ignition cylinder is equipped with a key lock that could stop the vehicle from starting if the key isn't inside it. If the ignition switch on your 900 isn't functioning properly, check to see whether the key is within the lock or stuck inside the barrel. It is also important to rotate your keys and keep them clean to prevent bent.

Saab cars differ from other vehicles because they don't use traditional metal keys. Instead, the car recognizes electric signals generated by the key fob through the use of a special microchip.

If you lose your only working key fob, the dealer will charge you top dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM of your current computer to make it accept new keys, without the need for replacement. This will save you over 50% of the cost the dealer charges! We call it the SAAB KEY PROGRAM. Find out more information about it here!

How to Replace the Ignition Key on a saab 93 Key Fob 9-5

The metal portion of a classic Saab key is easy to copy, and it's not much of a barrier against vehicle theft. The real security is the electronic component of the key-fob, which contains a chip that recognizes your car when it's put into the ignition switch.

Saab's anti-theft device has been relying on this technology for over a decade. It's not quite as effective as a door lock however, it makes the theft of your car more difficult. That's why every Saab owner should always keep an extra key on hand.

Most new Saabs come with two keys right from the factory, but you can upgrade them at a dealer through a special handheld computer known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which have more modern and advanced features that require a separate key-fob to work through a different process.

The dealer will replace the CIM or TWICE module in these cars if the keys have been lost, and cost you top dollar for the process. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to Replace the Ignition Key in an XC90 Saab

It could be time to replace your SAAB key fob if it's experiencing difficulty turning the barrel of the lock. It's a simple process and you don't have to go to a dealership. You can complete the process at home using a few basic tools.

First, you'll need to prepare the new key. Before starting, make sure that the anti-theft device is disabled by placing blocks on your rear wheels and activating the handbrake. Next, put the key in the ignition and switch it to the on position, which activates the accessories, but does not start the engine. Repeat this procedure 5 times, and then put the key in the "on" position.

You'll then have to buy an additional case for your key fob. These are available at most auto parts stores and are usually very affordable. They can be purchased with or without electronics, depending on the model.

To open the case, put an flathead screwdriver into the slot in the middle and slowly work it. The case will split easily, and once you've got it open, you'll get access to the internal electronics. To take the electronics out, use a small screwdriver, and try to pry them out in a gentle manner.